B4 TECTA PDS, Automated Microbiology Detection System

B4 TECTA PDS, Automated Microbiology Detection System

0  0.0

Rp  0

Add to Cart

Operating Modes : Fully automated monitoring, interpretation and reporting of results. All results available locally or remotely via email (network connection required). Automatic system confirmation and calibration.
Run Mode – Incubation and interpretation in 2-18 hours.
Read Mode – Interpretation of pre-incubated samples in 60 seconds

Typical Detection Times :
1. TECTAlert-ECA, E.Coli
< 1 CFU/100 ml : within 16 hrs
100 CFU/100 ml : within 9 hrs
1,000 CFU/100 ml : within 8 hrs
10 CFU/100 ml : within 4 hrs

2. TECTAlert-FCA, Fecal Coliform
< 1 CFU/100 ml : within 18 hrs
100 CFU/100 ml : within 10 hrs
1,000 CFU/100 ml : within 9 hrs
10 CFU/100 ml : within 5 hrs

3. TECTAlert-CCA, Total Coliform & E.Coli
< 1 CFU/100 ml : within 18 hrs
100 CFU/100 ml : within 12 hrs
1,000 CFU/100 ml : within 11 hrs
10 CFU/100 ml : within 7 hrs

4. TECTAlert-ENA, Enterococcus
< 1 CFU/100 ml : within 24 hrs
100 CFU/100 ml : within 12 hrs
1,000 CFU/100 ml : within 10 hrs
10 CFU/100 ml : within 4 hrs

User Interface : 7” (17.7 cm) front touch-screen display controls all functions. USB keyborad port optl.
Power Supply :120 VAC / 220 VAC versions available (must specify).
Weight (Installed) :Approximately 7.8 Kg / 17 lbs

Physical Dimensions :
Height: 275 mm / 11 inches
Maximum height (open for cleaning): 525 mm / 21 inches
Width: 305 mm / 12 inches
Depth (front to back): 486 mm / 18 inches


Tecta PDS merupakan System Fully Automatic identifikasi E.Coli dan Coliform

dengan approval dari EPA USA. Pengujian yang cepat mulai dari 2 jam, akurat 

dan dapat dilakukan untuk on-site analysis.